Forum comments in chronological order
Disclaimer: I am not responsible for what people (other than myself) write in the forums. Please report any abuse, such as insults, slander, spam and illegal material, and I will take appropriate actions. Don't feed the trolls.
Jag tar inget ansvar för det som skrivs i forumet, förutom mina egna inlägg. Vänligen rapportera alla inlägg som bryter mot reglerna, så ska jag se vad jag kan göra. Som regelbrott räknas till exempel förolämpningar, förtal, spam och olagligt material. Mata inte trålarna.
- Jun 2007
- Aug 2007
- Oct 2007
- Nov 2007
- Dec 2007
- Jan 2008
- Feb 2008
- Mar 2008
- Apr 2008
- May 2008
- Jun 2008
- Jul 2008
- Aug 2008
- Sep 2008
- Oct 2008
- Nov 2008
- Dec 2008
- Jan 2009
- Feb 2009
- Mar 2009
- Apr 2009
- May 2009
- Jun 2009
- Jul 2009
- Aug 2009
- Sep 2009
- Oct 2009
- Nov 2009
- Dec 2009
- Jan 2010
- Feb 2010
- Mar 2010
- Apr 2010
- May 2010
- Jun 2010
- Jul 2010
- Aug 2010
- Sep 2010
- Oct 2010
- Nov 2010
- Dec 2010
- Jan 2011
- Feb 2011
- Mar 2011
- Apr 2011
- May 2011
- Jun 2011
- Jul 2011
- Aug 2011
- Sep 2011
- Oct 2011
- Nov 2011
- Dec 2011
- Jan 2012
- Feb 2012
- Mar 2012
- Apr 2012
- May 2012
- Jun 2012
- Jul 2012
- Aug 2012
- Sep 2012
- Oct 2012
- Nov 2012
- Dec 2012
- Jan 2013
- Feb 2013
- Mar 2013
- Apr 2013
- May 2013
- Jun 2013
- Jul 2013
- Aug 2013
- Sep 2013
- Oct 2013
- Nov 2013
- Dec 2013
- Jan 2014
- Feb 2014
- Mar 2014
- Apr 2014
- May 2014
- Jun 2014
- Jul 2014
- Aug 2014
- Sep 2014
- Oct 2014
- Nov 2014
- Dec 2014
- Jan 2015
- Feb 2015
- Mar 2015
- Apr 2015
- May 2015
- Jun 2015
- Jul 2015
- Aug 2015
- Sep 2015
- Oct 2015
- Nov 2015
- Dec 2015
- Jan 2016
- Feb 2016
- Mar 2016
- Apr 2016
- May 2016
- Jun 2016
- Jul 2016
- Aug 2016
- Sep 2016
- Oct 2016
- Nov 2016
- Dec 2016
- Jan 2017
- Feb 2017
- Mar 2017
- Apr 2017
- May 2017
- Jun 2017
- Jul 2017
- Aug 2017
- Sep 2017
- Oct 2017
- Nov 2017
- Dec 2017
- Jan 2018
- Feb 2018
- Mar 2018
- Apr 2018
- May 2018
- Jun 2018
- Jul 2018
- Aug 2018
- Sep 2018
- Oct 2018
- Nov 2018
- Dec 2018
- Jan 2019
- Feb 2019
- Mar 2019
- Apr 2019
- May 2019
- Jun 2019
- Jul 2019
- Aug 2019
- Sep 2019
- Oct 2019
- Nov 2019
- Dec 2019
- Jan 2020
- Feb 2020
- Mar 2020
- Apr 2020
- May 2020
- Jun 2020
- Jul 2020
- Aug 2020
- Sep 2020
- Oct 2020
- Nov 2020
- Dec 2020
- Jan 2021
- Feb 2021
- Mar 2021
- Apr 2021
- May 2021
- Jun 2021
- Jul 2021
- Aug 2021
- Sep 2021
- Oct 2021
- Nov 2021
- Dec 2021
- Jan 2022
- Feb 2022
- Mar 2022
- Apr 2022
- May 2022
- Jun 2022
- Jul 2022
- Aug 2022
- Sep 2022
- Oct 2022
- Nov 2022
- Dec 2022
- Jan 2023
- Feb 2023
- Mar 2023
- Apr 2023
- May 2023
- Jun 2023
- Jul 2023
- Aug 2023
- Sep 2023
- Oct 2023
- Nov 2023
- Dec 2023
- Jan 2024
- Feb 2024
- Mar 2024
- Apr 2024
- May 2024
- Jun 2024
- Jul 2024
- Aug 2024
- Sep 2024
- Oct 2024
- Nov 2024
- Dec 2024
Jul 2008
Anonymous
Tue 8-Jul-2008 00:15
Tue 8-Jul-2008 00:15
Fun!!!! yay!!
Anonymous
Tue 15-Jul-2008 05:32
Tue 15-Jul-2008 05:32
You are awesome. Thank you for sharing this!
Anonymous
Tue 15-Jul-2008 23:46
Tue 15-Jul-2008 23:46
!!!I'M SPEECH-LESS!!!
Great demo!
Great demo!
Anonymous
Thu 17-Jul-2008 04:32
Thu 17-Jul-2008 04:32
This is amazing. Congrats on your work.
Anonymous
Fri 18-Jul-2008 19:43
Fri 18-Jul-2008 19:43
Awesome
Anonymous
Sun 20-Jul-2008 19:09
Sun 20-Jul-2008 19:09
Can't wait to see this performed live!
(foto)
Anonymous
Tue 22-Jul-2008 09:20
Tue 22-Jul-2008 09:20
Hej, var ligger MOM Livs?
-anders
-anders
lft
Linus Åkesson
Tue 22-Jul-2008 09:39
Linus Åkesson
Tue 22-Jul-2008 09:39
Hej, var ligger MOM Livs?
-anders
-anders
Hej! Det ligger vid Mårtenstorget i Lund.
Anonymous
Tue 22-Jul-2008 11:03
Tue 22-Jul-2008 11:03
It's unbelievable !
Congratulations for your great work :)
Congratulations for your great work :)
Anonymous
Tue 22-Jul-2008 11:51
Tue 22-Jul-2008 11:51
The amount of current would be very small. And the time it flows can be minimized by providing 5V on the sensing side when not measuring resistance, in effect giving very ner zero volts of difference between the electrodes.
Don't even need to do that, as the capacitor will charge up until there is close to zero volts across the resistor (in this case, the soil).
A case against syntax highlighting
Ferruccio
Tue 22-Jul-2008 13:51
Tue 22-Jul-2008 13:51
Thanks. You expressed this notion much better than I did:
http://the-lazy-programmer.com/blog/?p=9
http://the-lazy-programmer.com/blog/?p=9
Anonymous
Wed 23-Jul-2008 09:06
Wed 23-Jul-2008 09:06
Very inspiring. I will give it a try. I hope this starts a new demo category.
Nice work!
-- George Laskowsky Ziguilinsky
Nice work!
-- George Laskowsky Ziguilinsky
Anonymous
Wed 23-Jul-2008 09:44
Wed 23-Jul-2008 09:44
Great Job. You are an AVR SuperHero!
Anonymous
Wed 23-Jul-2008 09:46
Wed 23-Jul-2008 09:46
Haha. En cyborgel! :)
Riktigt coolt.
Riktigt coolt.
Anonymous
Wed 23-Jul-2008 11:03
Wed 23-Jul-2008 11:03
Great job, it reminds me the old days of the C64 demo scene :).
I feel 20 year younger now :)
I feel 20 year younger now :)
A case against syntax highlighting
Anonymous
Thu 24-Jul-2008 22:09
Thu 24-Jul-2008 22:09
I think the highlighting of Vim could be much better if it would only highlight comments and keywords like Eclipse does (If you ignore the things like highlighting defined variables and so on that aren't possible with a simple editor because it doesn't know all source-files of your project). Maybe the Vim-guys tried to use as much colors, as an IDE uses for all things it's able to highlight, to highlight the basic things that are normally highlighted with only 2 colors :P
You can write your own syntax highlight file where you only specify certain items to be highlighted.Anonymous
Tue 29-Jul-2008 06:04
Tue 29-Jul-2008 06:04
I am highly impressed!
I was doing something similar, but I've only generated VGA signal and no sound... and my scheme involves two memory chips (page switching), a CPLD to control sync pulses and memory, and a PIC to write data into the memory.
Anyway, props to you for doing this all in software on one chip!
TSM
I was doing something similar, but I've only generated VGA signal and no sound... and my scheme involves two memory chips (page switching), a CPLD to control sync pulses and memory, and a PIC to write data into the memory.
Anyway, props to you for doing this all in software on one chip!
TSM
Anonymous
Wed 30-Jul-2008 02:40
Wed 30-Jul-2008 02:40
Great, Great, Great. Congratulations for this.
Anonymous
Wed 30-Jul-2008 02:45
Wed 30-Jul-2008 02:45
If I didn't like your compositions so much, I'd say that, by your self-description, you are a little bit pretentious...
Anonymous
Wed 30-Jul-2008 14:53
Wed 30-Jul-2008 14:53
I like this project. I like atmel. I like life.
After this, build your own OS.
Then automations...
After this, build your own OS.
Then automations...
metal
oash82@yahoo.com
Thu 31-Jul-2008 09:08
oash82@yahoo.com
Thu 31-Jul-2008 09:08
Hi,
I was wondering what software do u use to draw the stripboard layout ?
Thanks
I was wondering what software do u use to draw the stripboard layout ?
Thanks